Cell Counter

Multisizer COULTER COUNTER

Multisizer 4 COULTER COUNTER

Increased dynamic range & resolution
Proven technology, Superior instrument design and Quality assurance friendly
Digital Pulse Processor (DPP) and Dynamic size measurements
Provides number, volume, mass and surface area size distributions in one measurement
V-Check (IQ, OQ, PQ) instrument validation
Particle Size Analysis range: 0.4 µm to 1600 µm in diameter. 0.033 fL to 2.145 x 109 fL or µm3 in volume
Humidity: 10% to 80% without condensation

Request a Quotation

Multisizer 4e COULTER COUNTER

Accurate metering device determines cell concentration so you know the exact analyzed volume and Increased dynamic range and resolution
Cell, volume, size and concentration (counts) can be measured
Only method that measures a particle “volumetrically” and gives a three-dimensional measure of particle size
Measures one cell/particle at a time
Overall sizing range of 0.2 um to 1600 umVisual particle trending

Request a Quotation

D1101	Solid block for machining (no holes)
D1102	Block, 48 x 0.2 ml PCR tubes or 6 x 0.2 ml strips
D1102A	Block, 24 x 2.0ml tubes
D1105	Block, 24 x 0.5 ml tubes
D1105A	Block, 24 x 1.5 ml tubes
D1106	Block, 35 x 6 mm tubes
D1110	Block, 20 x 10 mm tubes
D1112	Block, 20 x 12 mm tubes
D1113	Block, 20 x 13 mm tubes
D1115-TALL	Block, 12 x 15 ml centrifuge tubes
D1116	Block, 12 x 15 or 16 mm tubes
D1117	Block, 12 x 17 mm tubes
D1120	Block, 6 x 20 mm tubes
D1125	Block, 6 x 25 mm tubes
D1150-TALL	Block, 5 x 50 ml centrifuge tubes
D1196-PCR	Single Block, 96 well PCR plate, skirted or nonskirted (for single block unit only)
D1296	Dual Block, 96 well microtiter plate or 4 slides (for dual block unit only)
D1296-PCR	Dual Block, 96 well PCR plate, skirted or nonskirted (for dual block unit only)
D12384	Dual Block, 384 well plate, (for dual block unit only)
D1100-PS	PopStopper for microtube blocks, D1102, D1102A, D1105, D1105A
D1105A-RACK	Rack accessory for 20 x 1.5 ml tubes, compatible with D1105A, pack of 3

Specification	Agilent 2100 Bioanalyzer Instrument
Weight	10 kg (22 lbs)
Dimensions (w × d × h)	162 × 412 × 290 mm (6.4 × 16.2 × 11.4 in)
Line voltage	100-240 VAC
Line frequency	50-60 Hz
Power consumption	60 VA
Ambient operating temperature	5-40°C (41-104°F)
Safety standards: IEC, CSA, UL	Installation category II, Pollution Degree 2

Feature	Description
Dynamic Range	>10⁴ (16-bit data format) >10⁵ (20-bit data format) >10⁶ (with XDR scanning)
Dynamic AutoFocus	Continually adjusts scanner’s focus, keeping features in focus at all times
Resolution	2, 3, 5, and 10 microns
Autoloader	24-slide cassette allows for hands-off operation
Integrated Barcode Reader	Reads code 128 (A,B,C), Code 39, Code 93, and CODABAR
Compatible Dyes	Cyanine 3 and Cyanine 5, and Alexa 647, 555, and 660
Laser Information	Green solid-state laser, 532 nm; red solid-state laser, 640 nm Power: 20 mW at 532 nm and 640 nm both controlled to 13 mW
Scan Window Maximum	71 mm x 21.6 mm
PMT Adjustment	Automatic PMT gain calibration before each run Allows adjustment of signal levels from 100% (default) to 1%
Detection Limit	0.01 chromophores per square micron
Pixel Placement Error	1 pixel @ 5 micron resolution
Uniformity	5% CV global non-uniformity; average local non-uniformity is typically 1% based on 100 micron features
Glass Dimensions Supported	1 x 3″ (25 mm x 75 mm) glass slide Width: 24.95 mm to 26.1 mm Length: 74.8 mm to 76.45 mm Thickness: 0.9 mm to 1.1mm Non-Mirrored slides of low intrinsic fluorescence
Scan time	Two-color simultaneous data acquisition in 16 minutes per for 3-micron scans and 24 minutes for 2-micron scans (scan region of 61 mm x 21.6 mm)
Data Workstation and Operating System	PC-based with Windows® 7 – 64 bit
Approximate Scanner Dimensions	Height: 16.5” (42 cm), Width: 17” (43 cm); Depth: 26” (67 cm)
Weight	Scanner: 125 lbs (56.8 kg)
Power Input	100 – 240 VAC, 50 – 60 Hz, 250 VA max.
Fuses	Two power supply fuses: T4A, 250 VAC
Humidity	Operating: 15% to 85% RH at 30°C
Altitude	Operating maximum: 2,300 m (7,500 ft)
Operating Temperature Range	15°C to 30°C
Laser Product Classification	Class 1

Rotator Motor Speed	2 to 20 RPM
Approximate Oven Dimensions	Height: 22.0″ (55.8 cm) Width: 17.4″ (44.5 cm) Depth: 17.75″ (39.5 cm)
Approximate Chamber Dimensions	Height: 14.5″ (36.8 cm) Width: 12.5″ (31.8 cm) Depth: 12.0″ (30.5 cm)
Operating Temperature Range	+ 5° to 70°C (+/- 0.1°C)
Weight	75 lbs (34.0 kg)
Power Input	110-120 volts, 220-240 volts
Hybridization oven – Accessories
Hybridization Chamber Rotator Rack	Holds up to 24 hybridization chambers during hybridization oven incubation

Model	Mini PAGE System	Mini PAGE Electroblotting System	Mini PAGE Tube Gel System
Gel Dimensions	10 x 10 cm	NA	8cm long
Capacity	2 gels/run*	3 gels/transfer	10 tubes/run
Maximum Samples	20 per gel	NA	10 (1/gel)
Buffer Tank (WxDxH)	19 x 13 x 15 cm	19 x 13 x 15 cm	19 x 13 x 15 cm
Buffer Volume	250 mL	1200 mL	500 mL
Included Items**	2 ea 10 x 10 notched plates 2 ea 10 x 10 plates w/spacers 2 ea 1 mm comb, 12 wells PAGE Module, casting base	3 ea blotting cassettes 6 ea fiber pads Blotting module	20 ea capillary tubes 20 ea tube supports 10 ea blocking plugs 2D module
Catalog Number (Ordering Information)	SBE2010-P	SBE2010-PB SBE2010-BT (Comes without PAGE insert)	SBP2010-P2
It is possible to run 4 gels by stacking the plates. *Each system includes buffer tank, lid with leads and cooling pack. The Blotting and 2D Gel Systems also include the PAGE components.

Multisizer COULTER COUNTER

Multisizer 4 COULTER COUNTER

Multisizer 4e COULTER COUNTER

About Us

Support

Products

Other Links

Specifications:

Ordering Information

Specifications:

Ordering Information

Model	Mini 7	Mini 10	Midi 10	Midi Plus 10	Midi Plus 15	Maxi 20
Gel (WxL cm)	7 x 7	7 x 10	10 x 10	15 x 10	15 x 15	20 x 20
Unit (WxLxH cm)	9 x 21 x 9	9 x 21 x 9	12.5 x 22 x 9	17.5 x 26.5 x 9	17.5 x 26.5 x 9	23 x 39.5 x 9
Buffer Volume	225 mL	225 mL	300 mL	500 mL	500 mL	1,00 mL
Maximum Sample Capacity	32	64	100	140	210	450
Supplied Combs	8 Tooth (2)	8 Tooth (3)	10* Tooth (2)	16* Tooth (1) 20 Tooth (1)	16* Tooth (1) 28* Tooth (1) 20 Tooth (1)	20 Tooth* (2) 40 Tooth* (2)
Catalog Number (Ordering Information)	SBE1007-7	SBE1007-10	SBE1010-10	SBE1015-10	SBE1015-15	SBE1020-20