Microtome

Features

Manual: manual microtome has the essential features you need for safe, economic sectioning and optimized workflows.
Semi-automated Rotary Microtome: designed for routine and research applications in histopathology and industrial quality assurance laboratories.
Fully Automated Rotary Microtome: Reduce repetitive motions,Designed for fully motorized sectioning of both paraffin- and resin-embeddedspecimens, supports a broad spectrum of applications; in routine and research laboratories; in histology; in industrial materials and quality control.
Its two-in-one design concept, which allows motorized and manual sectioning, provides reproducible high-quality sections.

Blocks for Digital Block Heater

Ordering Information

D1101	Solid block for machining (no holes)
D1102	Block, 48 x 0.2 ml PCR tubes or 6 x 0.2 ml strips
D1102A	Block, 24 x 2.0ml tubes
D1105	Block, 24 x 0.5 ml tubes
D1105A	Block, 24 x 1.5 ml tubes
D1106	Block, 35 x 6 mm tubes
D1110	Block, 20 x 10 mm tubes
D1112	Block, 20 x 12 mm tubes
D1113	Block, 20 x 13 mm tubes
D1115-TALL	Block, 12 x 15 ml centrifuge tubes
D1116	Block, 12 x 15 or 16 mm tubes
D1117	Block, 12 x 17 mm tubes
D1120	Block, 6 x 20 mm tubes
D1125	Block, 6 x 25 mm tubes
D1150-TALL	Block, 5 x 50 ml centrifuge tubes
D1196-PCR	Single Block, 96 well PCR plate, skirted or nonskirted (for single block unit only)
D1296	Dual Block, 96 well microtiter plate or 4 slides (for dual block unit only)
D1296-PCR	Dual Block, 96 well PCR plate, skirted or nonskirted (for dual block unit only)
D12384	Dual Block, 384 well plate, (for dual block unit only)
D1100-PS	PopStopper for microtube blocks, D1102, D1102A, D1105, D1105A
D1105A-RACK	Rack accessory for 20 x 1.5 ml tubes, compatible with D1105A, pack of 3

MiniTwist Nutating Mixer

Specifications	Ordering Information
Speed Range: 24 rpm at 60 Hz, 20 rpm at 50 Hz Motion / tiltrange: Three Dimensional / Fixed Ambient Operating Range: +4º to 65ºC Platform Dimensions: 24 x 17cm/9.5 x 6.7 in. Dimensions:(W x D x H): 24 x 17 x 12.5cm / 9.5 x 6.7 x 5in Maximum load: 0.8 kg/1.8 lbs Weight: 1 kg/2.2 lb Electrical: 120V or 230V, 50/50 Hz	SBS500 – MiniTwist Nutating Mixer with dimpled mat, 120V SBS500-2 – MiniTwist Nutating Mixer with dimpled mat, 230V, EU power cord SBS500-3 – MiniTwist Nutating Mixer with dimpled mat, 230V, UK power cord

Rock-it Platform Rocker

Specifications	Ordering Information
Speed Range: 5 to 120 tilts/minute Motion / tiltrange: Rocking / Adjustable +/-20 º Ambient Operating Range: +4º to 65ºC Platform Dimensions: 35.5 x 28cm/14 x 11 in. Clearance bet. Platforms: 9cm / 3.5 inches Dimensions: ( W x D x H) : 36 x 38 x 18cm/14.2 x 15 x7.1 in. Timer: 20 to 120 minutes or hold Maximum load: 5 kg / 11lb Weight: 6.5 kg/14.3 lb Electrical: 120V or 230V, 50/50 Hz	SBS300 Rock-it Platform Rocker, single platform, 120V SBS300-2 Rock-it Platform Rocker, single platform, 230V, EU Power Cord SBS300-3 Rock-it Platform Rocker, single platform, 230V, UK Power Cord SBS300-D Rock-it Platform Rocker, double platform, 120V SBS300-D-2 Rock-it Platform Rocker, double platform, 230V, EU Power Cord SBS300-D-3 Rock-it Platform Rocker, double platform, 230V, UK Power Cord

Specifications

Ordering Information

Speed Range: 5 to 120 tilts/minute
Motion / tiltrange: Rocking / Adjustable +/-20 º
Ambient Operating Range: +4º to 65ºC
Platform Dimensions: 35.5 x 28cm/14 x 11 in.
Clearance bet. Platforms: 9cm / 3.5 inches
Dimensions: ( W x D x H) : 36 x 38 x 18cm/14.2 x 15 x7.1 in.
Timer: 20 to 120 minutes or hold
Maximum load: 5 kg / 11lb
Weight: 6.5 kg/14.3 lb
Electrical: 120V or 230V, 50/50 Hz

SBS300 Rock-it Platform Rocker, single platform, 120V
SBS300-2 Rock-it Platform Rocker, single platform, 230V, EU Power Cord
SBS300-3 Rock-it Platform Rocker, single platform, 230V, UK Power Cord
SBS300-D Rock-it Platform Rocker, double platform, 120V
SBS300-D-2 Rock-it Platform Rocker, double platform, 230V, EU Power Cord
SBS300-D-3 Rock-it Platform Rocker, double platform, 230V, UK Power Cord

MiniMixer Blot Mixer

Specifications	Ordering Information
Speed Range: 18 rpm at 60 Hz, 20 rpm at 50 Hz Motion / tiltrange: Three dimensional/fixed 5º Ambient Operating Range: +4º to 65ºC Platform Dimensions: 24 x 17 cm/9.5 x 6.7 in.. Dimensions : ( W x D x H) : 24 x 17 x 12.5 cm / 9.5 x 6.7 x 5 in. Maximum load: 0.8 kg/1.8 lbs Weight: 1 kg/2.2 lb Electrical: 120V or 230V, 50/50 Hz	SBS600 MiniMixer with dimpled mat, 120V SBS600-2 MiniMixer with dimpled mat, 230V, EU power cord SBS600-3 MiniMixerwith dimpled mat, 230V, UK power cord

Bioanalyzer Instrument

Details & Specifications
Agilent provides a complete solution with two configurations available:

2100 Bioanalyzer instrument with exchangeable cartridges for electrophoresis and flow cytometry.
2100 Electrophoresis Bioanalyzer instrument with an exchangeable cartridge for electrophoresis only.

Each system configuration includes:

Chip priming station
Chip vortexer
2100 Expert Software for instrument control and data analysis (expandable for full compliance support in regulated environments)
Service and support on system and applications

Specification	Agilent 2100 Bioanalyzer Instrument
Weight	10 kg (22 lbs)
Dimensions (w × d × h)	162 × 412 × 290 mm (6.4 × 16.2 × 11.4 in)
Line voltage	100-240 VAC
Line frequency	50-60 Hz
Power consumption	60 VA
Ambient operating temperature	5-40°C (41-104°F)
Safety standards: IEC, CSA, UL	Installation category II, Pollution Degree 2

For research use only. Not for clinical use.

Microarray Scanner

Details & Specifications

Feature	Description
Dynamic Range	>10⁴ (16-bit data format) >10⁵ (20-bit data format) >10⁶ (with XDR scanning)
Dynamic AutoFocus	Continually adjusts scanner’s focus, keeping features in focus at all times
Resolution	2, 3, 5, and 10 microns
Autoloader	24-slide cassette allows for hands-off operation
Integrated Barcode Reader	Reads code 128 (A,B,C), Code 39, Code 93, and CODABAR
Compatible Dyes	Cyanine 3 and Cyanine 5, and Alexa 647, 555, and 660
Laser Information	Green solid-state laser, 532 nm; red solid-state laser, 640 nm Power: 20 mW at 532 nm and 640 nm both controlled to 13 mW
Scan Window Maximum	71 mm x 21.6 mm
PMT Adjustment	Automatic PMT gain calibration before each run Allows adjustment of signal levels from 100% (default) to 1%
Detection Limit	0.01 chromophores per square micron
Pixel Placement Error	1 pixel @ 5 micron resolution
Uniformity	5% CV global non-uniformity; average local non-uniformity is typically 1% based on 100 micron features
Glass Dimensions Supported	1 x 3″ (25 mm x 75 mm) glass slide Width: 24.95 mm to 26.1 mm Length: 74.8 mm to 76.45 mm Thickness: 0.9 mm to 1.1mm Non-Mirrored slides of low intrinsic fluorescence
Scan time	Two-color simultaneous data acquisition in 16 minutes per for 3-micron scans and 24 minutes for 2-micron scans (scan region of 61 mm x 21.6 mm)
Data Workstation and Operating System	PC-based with Windows® 7 – 64 bit
Approximate Scanner Dimensions	Height: 16.5” (42 cm), Width: 17” (43 cm); Depth: 26” (67 cm)
Weight	Scanner: 125 lbs (56.8 kg)
Power Input	100 – 240 VAC, 50 – 60 Hz, 250 VA max.
Fuses	Two power supply fuses: T4A, 250 VAC
Humidity	Operating: 15% to 85% RH at 30°C
Altitude	Operating maximum: 2,300 m (7,500 ft)
Operating Temperature Range	15°C to 30°C
Laser Product Classification	Class 1

* Descriptions and specifications subject to change without notification.

Microarray Hybridization Oven

Details & Specifications

Rotator Motor Speed	2 to 20 RPM
Approximate Oven Dimensions	Height: 22.0″ (55.8 cm) Width: 17.4″ (44.5 cm) Depth: 17.75″ (39.5 cm)
Approximate Chamber Dimensions	Height: 14.5″ (36.8 cm) Width: 12.5″ (31.8 cm) Depth: 12.0″ (30.5 cm)
Operating Temperature Range	+ 5° to 70°C (+/- 0.1°C)
Weight	75 lbs (34.0 kg)
Power Input	110-120 volts, 220-240 volts
Hybridization oven – Accessories
Hybridization Chamber Rotator Rack	Holds up to 24 hybridization chambers during hybridization oven incubation

Mini Vertical PAGE Systems

Details & Specifications

Model	Mini PAGE System	Mini PAGE Electroblotting System	Mini PAGE Tube Gel System
Gel Dimensions	10 x 10 cm	NA	8cm long
Capacity	2 gels/run*	3 gels/transfer	10 tubes/run
Maximum Samples	20 per gel	NA	10 (1/gel)
Buffer Tank (WxDxH)	19 x 13 x 15 cm	19 x 13 x 15 cm	19 x 13 x 15 cm
Buffer Volume	250 mL	1200 mL	500 mL
Included Items**	2 ea 10 x 10 notched plates 2 ea 10 x 10 plates w/spacers 2 ea 1 mm comb, 12 wells PAGE Module, casting base	3 ea blotting cassettes 6 ea fiber pads Blotting module	20 ea capillary tubes 20 ea tube supports 10 ea blocking plugs 2D module
Catalog Number (Ordering Information)	SBE2010-P	SBE2010-PB SBE2010-BT (Comes without PAGE insert)	SBP2010-P2
It is possible to run 4 gels by stacking the plates. *Each system includes buffer tank, lid with leads and cooling pack. The Blotting and 2D Gel Systems also include the PAGE components.

Horizontal Electrophoresis Systems

Details & Specifications

Model	Mini 7	Mini 10	Midi 10	Midi Plus 10	Midi Plus 15	Maxi 20
Gel (WxL cm)	7 x 7	7 x 10	10 x 10	15 x 10	15 x 15	20 x 20
Unit (WxLxH cm)	9 x 21 x 9	9 x 21 x 9	12.5 x 22 x 9	17.5 x 26.5 x 9	17.5 x 26.5 x 9	23 x 39.5 x 9
Buffer Volume	225 mL	225 mL	300 mL	500 mL	500 mL	1,00 mL
Maximum Sample Capacity	32	64	100	140	210	450
Supplied Combs	8 Tooth (2)	8 Tooth (3)	10* Tooth (2)	16* Tooth (1) 20 Tooth (1)	16* Tooth (1) 28* Tooth (1) 20 Tooth (1)	20 Tooth* (2) 40 Tooth* (2)
Catalog Number (Ordering Information)	SBE1007-7	SBE1007-10	SBE1010-10	SBE1015-10	SBE1015-15	SBE1020-20

MiniGel II

Specifications:

Output voltage/current: 10V to 150V/10 – 400 mA
Timer: 0 to 99 hours or continuous, audible alert
Overall Dimensions (W x D x H): 10 x 6.7 x 2.5 in./24.5 x 17 x 6.2 cm
Gel Capacity: 1 large (12.5 x 12 cm), 2 small (12.5 x 6 cm), or 4 micro (6 x 6 cm)

Ordering Information

SBE0160 MiniGel II with gel tank, direct connect power supply, 1 large and 2 small gel trays, 4 combs and casting stand, 120V
SBE160-2 MiniGel II with gel tank, direct connect power supply, 1 large and 2 small gel trays, 4 combs and casting stand, 230V, with EU power cord
SBE160-3 MiniGel II with gel tank, direct connect power supply, 1 large and 2 small gel trays, 4 combs and casting stand, 230V with UK power cord
SBE166 Micro casting set for four gels, includes casting stand, four 6 x 6 cm gel trays and 4 combs
SBE161 Gel tray, large, 12.5 x 12 cm, set of 2
SBE162 Gel tray, small, 12.5 x 6 cm, set of 2
SBE163 Gel tray, micro, 6 x 6 cm, set of 4
SBE164 Large comb, 13.28 wells, set of 2
SBE165 Small comb, 5/8 wells, set of 2
SBE167 Mini casting stand
SBE168 Standard casting set, includes 1 large gel tray, 2 small gel trays, 4 large combs and a casting stand.

MiniGel II

Specifications:

Ordering Information

Demo Request

Services Request

Features

About Us

Support

Products

Other Links

Specifications:

Ordering Information

Specifications:

Ordering Information