Incubator Shaker
As one of the few instruments dedicated to simultaneous heating and mixing of small samples, it has the largest capacity and is supplied with interchangeable platforms for microtubes and microplates.
Features
- Both temperature and shaking speed are adjustable over a broad range.
- Uniformity and stability within the chamber are a result of mechanical convection.
- For static incubations, the shaker may be turned off.
- Operating parameters, including time and temperature, are controlled by a microprocessor.
- Self-diagnostic software continuously monitors for proper temperature and shaking speed, alerting the user to any errors.
- Heating and shaking are controlled by feedback loops which precisely maintain chosen parameters, independent of load or voltage fluctuations.
- Provides stability during high speed shaking.
- The chamber is fully insulated to maintain uniform temperature and to reduce operating noise.
Specification
| Temperature Range | Ambient +5 to 99ºC |
| Temperature Accuracy | ±0.5ºC |
| Speed Range: 120V | 200 – 1,200 rpm, 230V: 200 – 1,500 rpm |
| Motion/Orbit | Circular, 3 mm |
| Timer | 1 to 999 minutes or continuous |
| Capacity | 56 x 1.5/2.0 ml tubes; 4 standard or 2 deep well plates |
| Dimensions:(W x D x H ) | 23 x 31 x 23 cm/9 x 12.3 x 9 in. |
| Weight | 11 kg/24.2 lb |
| Electrical | 120V or 230V, 50/60 Hz |
Ordering Information
| SBS256 | IncuMix Incubator Shaker with interchangeable platforms for tubes and plates, 120V |
| SBS256-2 | IncuMix Incubator Shaker with interchangeable platforms for tubes and plates, 230V, EU power cord |
| SBS256-3 | IncuMix Incubator Shaker with interchangeable platforms for tubes and plates, 230V, UK power cord |
| C1205 | Individual adapters for 0.5/0.6 ml tubes, pack of 6 |
| C1206 | Individual adapters for 0.4 ml tubes, pack of 6 |
| C1222 | Individual adapters for 0.2 ml tubes, pack of 6 |
